Is the microwave causing your lights to flicker? Have you found your breakers are tripping with greater frequency? You may even notice a faint buzz or some warmth from the electrical panel.
Homeowners would rather not be asking such questions, yet to put them aside is to court trouble. We at Duryea Electric have been putting families in the Pioneer Valley at ease and keeping their homes powered for two decades now. Should you have any concerns over your panel, we can be reached at (413) 331-6080.
In a sense the heart of the home’s power system, an overloaded electrical panel will put up warning signs well before matters become serious. One only has to know what they are.
What it Means to be Overloaded
The electrical panel in any home has its limits, in terms of amps. In older houses the wiring was put in for a different way of life, one without central air, an array of televisions, a kitchen brimming with appliances or an EV charger. Once the household requires more than the panel can put out, it is overloaded.
More of a hazard than a nuisance, the resulting heat is something no electrical system can take. Unchecked it is a fire risk. But there is ample warning to be had if one is observant.
Things to Watch For
Some indications that your panel is under undue strain:
- Breakers going off on a regular basis, particularly with a number of appliances in use
- A dimming or flicker of the lights as a large appliance is turned on
- The cover of the panel is warm where it ought to be cool
- Some humming, crackling or buzzing from the panel
- Outlets that are discolored or warm to the touch
- Scorch marks or a burning odour in the vicinity of the panel or outlets
- Having to put one device on standby to operate another
Any of these should be taken to heart. Several of them and you should put in a call to an electrician.
Do Not Dismiss These Signs
It is easy for a homeowner to make a habit of resetting the breaker and shrug it off. But a breaker that will not stay put is simply informing you the circuit has more load on it than it was made for. Then there is the flicker when the air conditioner comes on; the panel is having to work for it. The strain of it all will eventually take its toll on the components and connections within.
Too many electrical fires have their origin in a panel that has been giving warnings for months. Happily, an early intervention will stave off most of these scenarios.
Typical Causes
You will see the fix once you see the cause. An undersized panel is never right for a home. Or perhaps too many circuits are being run through one panel. There is also the matter of finishing a basement or a new room and not making allowance for the capacity. And with an EV charger installed but no service upgrade, the panel is bound to be overtaxed.
We see this often in Holyoke, Springfield, Chicopee and the towns around us. Homes here were built in an era with very different power requirements, so we are called on to do our share of panel replacements and service upgrades.
Make a Call to a Pro
There is no room for conjecture with an electrical panel. A qualified electrician will put your mind at rest by inspecting it, gauging the load and seeing if a repair or replacement is in order.
Ian Duryea, a Master Electrician, established Duryea Electric as a family concern some twenty years ago. We are devoted to electrical work, nothing else, which is how we ensure code compliance and handle panels and service upgrades on a daily basis. Green practices are part of how we do business as well.
For a free estimate and to put your options in perspective, get in touch with us Monday to Friday between 7:00am and 5:00pm.
Get Your Home Protected
Let a small issue fester into a large one? If your panel is running warm or the breakers will not hold, ring us at (413) 331-6080. We will give you a straight answer about your panel and set up an inspection. It is the right thing to do for the safety of your home.